Brush Assembly; Pole Assembly; Telescopic Pole (Not Included) Assembly - Kokido Telsa 10 Manual Del Usuario

All manuals and user guides at all-guides.com

Brush assembly

Align and push the brush into the notch on the front cover.

Pole assembly

Select the tube section with a threaded tip at the end. Insert and the threaded tip of
the pole section inside the pole connector and turn it clockwise to screw it inside.
Finish the assembly by inserting the grooved ends of the following section tubes in
the round ends of the remaining section tubes. The section with the grip is the last
section to be assembled.
Telescopic pole assembly
Note: V-clip is installed inside the pole connector for the purpose of securing the
telescopic pole (not included) in position. Slide the telescopic pole onto the pole
connector. Press on the side pins of the connector and slide the telescopic pole
further until the pins are secured inside the holes of the pole.
To release the telescopic pole, press down the side tabs simultaneously and pull out
the pole.
9