Getting Started; Charging The Battery - Kokido Telsa 10 Manual Del Usuario

leave the pool vacuum plugged in for long-term storage. Recharge the
pool vacuum every three months.
Above warnings and cautions are not intended to incorporate all possible
instances for risks and / or severe injuries. Pool / spa owners should always
exercise extra caution and common sense when utilizing the product.

GETTING STARTED

IMPORTANT NOTE: Fully charge the pool vacuum before using it for the first time.

Charging the battery

WARNING!
Charging must be done indoors, in a well-ventilated area away from sunlight,
children, heat, ignition sources, and with an ambient temperature between 5˚C (41˚F)
and 35˚C (95˚F).
Never use the external adaptor and charging base if any damage is detected.
Use only the original external adaptor provided.
Make sure the pool vacuum and the charging base are clean and dry before set-up.
1. Place the unit on a flat surface. Insert and slide the hook of the charging base into
the notch on the end of the main body unit it stops. Make sure the contact plates
are properly in contact.
2. Plug the female jack of the external adaptor into the charging port at the end of the
charging base.
WARNING!
DO NOT handle the pool vacuum, external adaptor and charging base while it is
charging with wet hands and without shoes.
Connect the external adaptor to the power source through a residential current
device (RCD).
All manuals and user guides at all-guides.com
7