Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3
Thread the appropriate size Quick Connect
Receiver onto the water supply pipe. Align
vertical indication on mount with registration
plate. Adjust teflon tape if necessary to achieve
tight and vertical. Remove Registration Plate.
7
Pull the Auto-Diverting Tub Spout's set
screw until it slides downward no further.
This holds the unit in place.
4
(Optional)
If necessary or desired, affix Trim Plate.
Pull
8
Lock the Auto-Diverting Tub Spout in place
by tightening the unit's set screw.
Apply caulk around the back edge of the
tub spout leaving a small gap at the bottom.
Tabla de contenido
