Tabla de contenido
Idiomas disponibles
Idiomas disponibles
13
Tighten the Slip-Fit Quick Connects Receiver's
four front facing screws. Each screw should
be tightened a little at a time, working in an
"X" pattern until they are fully tightened.
17
Pull the Auto-Diverting Tub Spout's set
screw until it slides downward no further.
This holds the unit in place.
Pull
14
Remove the Registration Plate.
18
Lock the Auto-Diverting Tub Spout in
place by tightening the unit's set
screw.
Tabla de contenido
