Kathrein UFO 340 Manual De Instrucciones página 13

7. Selecting the audio operating mode
Twin A:
Outp. Ch12
Stereo
Vol 3 Vid 2
Instructions regarding the operating mode "auto"
Only use for Sat programmes with VPS signals (data line).
Representation depends on the contents of the data line "Auto S" (Stereo), "Auto Z" (dual sound), "Auto M" (mono).
If the VPS signal is missing, automatic switch-over to operating mode "dual sound" is effected (displayed as
"Auto*Z").
The Sat audio carrier frequencies cannot not be changed in the operating mode "Auto."
For all programmes in German with teletext, the VPS signal is also transmitted. For these programmes, it is recom-
mended to set the operating mode "auto." Automatic switch-over in the module according to the set operating mode
is effected.
Note regarding operating mode "dual sound":
In the operating mode "dual sound", the Sat audio carrier frequencies can be changed in the submenu.
Purpose: Switching between sound 1 and sound 2 for multilingual programmes (e.g. Eurosport).
Twin A:
Outp. Ch12
Dual sound
Vol 3 Vid 2
Main menu
Note regarding the TV standards:
The processing of the TV accompanying sound is only possible in stereo, if standard B/G is selected.
If another TV standard (D/K, I or M) is selected, the processing of the accompanying sound is effected in mono. If the
Sat accompanying sound is in stereo, the processing of the mono signal on the output side is automatically effected per
summation ((L+R)/2) from the Sat stereo signal for the setting "stereo" or "auto" ("Auto S").
8. Selecting the Sat audio carrier frequency
Twin A:
Outp. Ch12
Stereo
Vol 3 Vid 2
9. Selecting the Sat audio carrier operating mode
Twin A:
Outp. Ch12
Stereo
Vol 3 Vid 2
All manuals and user guides at all-guides.com
The operating mode can be changed via the control unit with the
1744 MHz
"+" or "-" key (Selection "mono," "stereo," "dual sound" or
"auto").
224.25 MHz
7.02/7.20 MHz
In the audio operating mode "mono", the Sat audio carrier
operating mode can be selected ("sub" or "main," see item 9). AV
1744 MHz
224.25 MHz
7.02/7.20 MHz
AV
The second Sat audio carrier frequency has a fixed spacing of
1744 MHz
180 kHz to the first carrier in the operating mode "stereo" and
"dual sound."
224.25 MHz
7.02/7.20 MHz
The Sat audio carrier frequency (5.5 - 9 MHz) can be adjusted via
the control unit with the "+" or "-" key.
AV
Switch-over of the operating mode is carried out via the control
1744 MHz
unit with the "+" or "-" key. Select between:
Operating mode "Sub" (setting for Panda I subcarrier).
224.25 MHz
Operating mode "Main" (setting for main audio carrier,
7.02 MHz Sub
e.g. EUTELSAT).
The setting is only possible in the operating mode "mono."
AV
In the audio operating modes, "stereo," "dual sound" and "auto,"
the operating mode "Sub" is always automatically set.
*** UFO 340
Audio carrier swap:
7.20/7.02 MHz
< Return:
Submenu dual sound
***
Submenu.. >