Adjustment Of The Quickfastener - Spinder XPLORER+ Manual De Montaje

ADJUSTMENT OF THE QUICKFASTENER

Carry out this maintenance operation only if the bicycle carrier cannot be fitted
firmly to the trailer coupling, as described in the chapter "Fitting the bicycle
carrier to the trailer coupling".
Remove the bicycle carrier from the trailer coupling, as described under
"Dismantling the bicycle carrier".
 Loosen the locking nut slightly (fig. 1).
 Screw in the setting screw one quarter of a turn (fig. 1).
 Tighten the locking nut (fig. 2)
 Check whether the carrier is now firmly seated on the trailer coupling, as
described under "Fitting the bicycle carrier to the trailer coupling". If not,
repeat the above steps.
1 2
63