Cleaning And Care; Maintenance; Disposal - Spinder XPLORER+ Manual De Montaje

CLEANING AND CARE

The bicycle carrier can be cleaned with a mild cleaning agent, with warm water
and/or a soft cloth. First remove any coarse dirt and dust.
Do not use any solvents or similar cleaning agents, since these can
damage the bicycle carrier.
Leave the bicycle carrier to dry on its own. Do not use any electrical driers or
other heating equipment to speed up the drying process.
Clean the bicycle carrier regularly when used in coastal areas or in winter
conditions in order to wash off any salt and prolong the service life of the bicycle
carrier.
Store the bicycle carrier in a dry and protected area when not used for extended
periods (e.g. over winter) in order to prolong the service life of the bicycle
carrier.

MAINTENANCE

Check the bicycle carrier for wear before the start of every journey.
Defective metal parts and straps in particular must be replaced.
Please refer to our customer service for the replacement of parts.
Any modification of original parts and materials or the construction of bicycle
carrier can adversely affect its safety and serviceability.
The steel parts of the bicycle carrier are protected in the works against corrosion
by a powder coating. If this paint coating is damaged, please have the damage
rectified professionally as soon as possible.
Under normal conditions and use, the bicycle carrier only requires cleaning, and
is otherwise maintenance free.

DISPOSAL

Local regulations must be observed for the disposal of the product.
The packaging should also be sorted by type and disposed of in the relevant
collection containers.
Further information is available from your communal disposal point.
62