Tabla de contenido
2
3
Pos.
3. Luchtuitlaat
4. Luchtinlaat
1. Beitel
5. Starthendel
2. Beitelhouder
Netherlands
Codenr.
Luna ..........................................................................................................................................
Aantal slagen* .........................................................................................................per minuut
Beitelslag ............................................................................................................................mm
Geluidsniveau (EN ISO 15744).....................................................................................dB (A)
Trilling (EN 28662-1 & EN 28662-5+A1)........................................................................m/s²
Min. slangdiameter.............................................................................................................inch
Luchtinlaat..........................................................................................................................inch
Luchtverbruik bij 100% toevoer*.....................................................................................l/min
Luchtverbruik bij 20% toevoer* ....................................................................................l/min
Luchtverbruik bij 100% toevoer*.......................................................................................cfm
Luchtverbruik bij 20% toevoer*.......................................................................................cfm
Totale lengte........................................................................................................................mm
Gewicht .................................................................................................................................kg
Accessoires:
Platte beitel 20 mm ...................................................................................................................
Puntbeitel 35 mm ......................................................................................................................
Bouchardbeitel .........................................................................................................................
Volledige naalduitrusting ..........................................................................................................
Set naalden 3 mm /19 st............................................................................................................
* Bij 6,2 bar
5
4
1
20024-0109
ACHS-S
4400
33
100.5
2.7
3/8
¼
360
72
12.7
2.5
340
2.97
20023-1009
20023-1108
20023-1207
20023-1306
20023-1405
46
A straight-shaped chisel hammer. Intended for cleaning welds, concrete surfaces etc. Robust,
powerful and easy applicable machine. Forward directed airflow (Pos. 3), which provides clea-
ning of the work area by airflow. The tool is equipped with lever (Pos. 5) and provides high
impact speed. Chisel and needle equipment that can be easily replaced. Stroke number can be
adjusted by use of air regulator (not included in the standard supply).
Standard supply includes 3 chisels.
Health hazards
• User of the tool should always take care of his and other persons' safety. The user must always
use personal protective equipment.
• Wear safety goggles, in order to reduce risk of eye injuries that could be caused by flying saw-
dust, dust and sparkles.
• Inhalation of dust can be harmful to health. Wear a suitable visor or breathing apparatus, when
working in a dusty environment.
• In case of continuous work wear safety gloves protecting against the cold air.
• In order to avoid eventual aural injuries, always use ear protection when using the tool.
• The user must always pay attention to the fact that continuous use of rotating and impact pro-
ducing manual tools could result in baneful influence on health caused by the vibration.
• Ergonomic load: Work with the tools related to recurrent, monotone movements and unfa-
vourable body positions may cause back, scruff, arm, marrowbone and other joint injuries.
Description
27
Tabla de contenido
