Kunft KTE3513 Manual De Instrucciones página 9

starts the mode for comfort
anti-frost.
Then press (forward), or
segment.
Finally press to confirm the program and exit program setting.
will disappear, and the unit will be back in the normal working
mode.
The new program will be kept in memory and replace the original
program.
2-4 Weekly Program
You may select the weekly program according to 2-2.
First use will be as follows:
2-4-1 Time setting
Same as 2-1-1. The unit will automatically adjust to the current time
and operate accordingly.
2-4-2 Setting the Temperature
Same as 2-3-2.
2-4-3 Setting the Weekly Program
Hold for 3 seconds to enter the weekly program setting, the time
and operating mode are no longer displayed, and
is displayed while this setting is active. The unit stops heating
during the setting.
The Monday marker will begin to blink, the Monday program name
will also blink (and the corresponding program content is also shown).
The screen shows the following:
Press either or to select the daily program from
for Monday (1).
Press to confirm and automatically enter the Tuesday program (2).
With the same method, you can select a daily program for every
day of the week.
Finally press to finish setting the weekly program.
Then the symbol will disappear, and the unit will operate
according to new weekly program.
Note: Settings can be terminated at any time during setting.
The new content will be retained.
Economy , empty for the
(back) to copy the mode into every
is shown.
~
16
electric radiator 600W
3 OPEN WINDOW Function:
Your radiator is equipped with the open window function.
When the windows are open for an extended period of time, close
to where the radiator is located, a sensor detects the sharp drop in
the temperature. The radiator switches off automatically and the
symbol flickers on the screen.
The radiator is automatically turned on after 10 minutes.
However, you can manually turn on the radiator before the 10 minutes
have elapsed, by pressing the "
symbol disappears from the screen.
3-1 Starting of the function:
1. Press once. Using the keys
. Press
2. Once in the program fenestrate open, the following screen appears:
meaning "function not in operation"
Using the keys and , to change OFF to ON, (
"function is in operation")
The open window function is operational.
Press once to validate your choice. Without pressing the touch
button for 5 seconds, the function is validated automatically.
4 Factory pre-sets
The unit has the following factory pre-sets:
Date: 1 (Monday)
Clock: 00:00
Anti-frost: 7°C
Free mode temperature: 10°C
Comfort: 22°C
Economy: 17°C
EN
KTE3513
" button on the radiator. The "
and , choose among
once to confirm your choice.
meaning
17
"