Transportation And Storage - Ryobi EXPAND-IT RXB01 Traducción De Las Instrucciones Originales

■
Avoid using the product in bad weather
conditions, especially when there is a risk
of lightning.
■
Do not operate the product in poor lighting.
The operator requires a clear view of the
work area to identify potential hazards.
■
Use of hearing protection reduces the
ability to hear warnings (shouts or alarms).
The operator must pay extra attention to
what is going on in the work area.
■
Do not get distracted
concentrate on what you are doing. Think
about and consider the effect of your
actions carefully.
■
Operating similar tools nearby increases
both the risk of hearing injury and the
potential for other persons to enter your
working area.
■
Keep firm footing and balance. Do not
overreach. Overreaching can result in loss
of balance.
■
Always be sure of the footing on slopes.
Walk, never run.
■
Keep all parts of your body away from any
moving part. Rotating impeller blades can
cause severe injury.
■
Do not modify the product in any way or
use parts and accessories which are not
recommended by the manufacturer.
WARNING
Thoroughly inspect the product and identify
any problems or damage to it. Any part that
is damaged should be properly repaired or
replaced by an authorized service centre.
■
To reduce the risk of injury associated with
contacting rotating parts, always stop the
product, and disconnect from the power
supply (if applicable), and make sure all
moving parts have come to a stop:
●
before cleaning
●
when leaving the product unattended
●
before checking, maintaining, or working
on the product
●
after striking a foreign object to inspect
the product for damage
●
if the product starts to vibrate abnormally
(inspect immediately).
Your blower may be supplied with a harness.
Carefully adjust the harness to comfortably
help to support the weight of the product.
Identify the quick release mechanism and
practice using it before you start using the
product. Its correct use may prevent serious
injury in the case of an emergency. Never
wear additional clothing over the harness
or otherwise restrict access to the quick
release mechanism
and always
■
Wear a face filter mask in dusty conditions
to reduce the risk of injury associated with
the inhalation of dust.
■
Do not point the blower nozzle in the
direction of people or pets.
■
Never place objects inside the blower
tubes.
■
Do not operate the product near open
windows, etc.
■
Slightly
conditions.
■
Do not place blower on top of or near loose
debris. Debris may be sucked into intake
vent resulting in possible damage to the
product.

TRANSPORTATION AND STORAGE

For assembling with petrol-driven power
head
■
Stop the engine and allow it to cool before
storing or transporting.
■
Clean all foreign material from the product.
■
Drain all fuel from the tank into a container
approved for petrol. Remember to properly
replace and tighten the fuel cap.
■
If applicable, drain all lubricant from tank
into a container approved for lubricant.
Remember to properly replace the lubricant
cap.
■
Run the engine until it stops, this will
remove all fuel that could become stale and
leave varnish and gum in the fuel system.
■
Store the product in a cool dry and well-
ventilated place that is inaccessible to
children. Keep away from corrosive agents,
such as garden chemicals and de-icing
salts.
■
Do not store outdoors.
WARNING
dampen surfaces
English |
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
in dusty
BG
3