Dial Out The Caller List Number; Erase A Caller List/ Redial List Record; View & Dial Out The Last Redial Number; Set Undisturbed Duration - Spiker TP1 Manual De Usuario

DIAL OUT THE CALLER LIST NUMBER

The procedures are shown as follows:
1. Press ? / ? button to select the caller number.
2. Press button once, the selected number will be shown in the LCD & dialed out.

ERASE A CALLER LIST/ Redial list RECORD

Erase single record:
The caller list record can be deleted using the procedure below:
1. Press button or "Lista de
2. Press the button once.
3. The record will be deleted and LCD will show the next record
Erase all
1. Press button or "Lista de
2. Press & hold the
VIEW & DIAL OUT THE LAST REDIAL NUMBER
The unit can remember the last redial number up to 10 records.
To search on of the last redial number:
1. Press "Lista de
2. LCD will show the last redial number.
3. Press "Lista de

SET UNDISTURBED DURATION

When you don't want to be disturbed by any call for some time, you can set your phone to
undisturbed state, then for all incoming calls the unit will have no ring, but the caller ID still works.
To set the undisturbed duration, you can.
1. In standby mode hold ? key till the LCD show "00-00", the hour "00" will be blinking.
2. Enter the undisturbed hour duration by ? / ? key, then press MENU key to confirm.
3. Enter the minute duration by ? / ? key, using MENU key to confirm your setting.
Note: If you want to quit the undisturbed state, you can set the time duration to "00-00".
CID NUMBER AND DIALED NUMBER BROADCASTING AND REMOTE
TO CHECK THE CALLER ID NUMBER
The unit provides the incoming call number broadcasting function if you turn on the broadcasting
option.
" button & selected the number
" button once
button on the bottom cabinet for 4 seconds. All the records will be erased
" button once
" button again to view previous redial numbers.
33
User manual Spiker TP1