Setup; Date / Clock; Lcd Contrast; Set Flash Time - Spiker TP1 Manual De Usuario

User manual Spiker TP1

SETUP

DATE / CLOCK

1. In stand-by mode press MENU key LCD display " AJUSTE FECHA".
2. Press MENU key to setup date. The display shown: "2004". Entry the year by ? / ? keys,
press MENU key for confirmation.
3. Then, entry the month, day, hour, minute by ? / ? key as above procedure
Note: Every entry, you need to confirm using MENU key, otherwise the setting will not be saved.

LCD CONTRAST

1. In stand-by mode press MENU key, LCD display " AJUSTE FECHA"
2. Press ? / ? key until LCD shows "AJUSTE CONTRASTE".
3. Repeat the entry as above procedure.

SET FLASH TIME

1. In stand-by mode press MENU key , LCD display " AJUSTE FECHA"
2. Press ? / ? key until shows "AJUSTE TECLA R".
3. Repeat the entry as above procedure.
Note: the default flash time is 100ms.
RINGING MELODIES SELECTION & VOLUME CONTROL
There are 10 incoming melodies: five polyphonic rings (song 1-5) and five single tone rings (Ring 6
to 10).
1. In standby mode, hold the
corresponding ring will be previewed.
2. Press button to select other melodies, every time you select a new melody, the unit will
play the melody for some time.
3. Press button to adjust the volume of the ring. There are 3 levels: High, Middle or Low.
4. Press the hook switch or just wait for the time out, the setting will be saved automatically.
Notes: If you want to set the polyphonic song, Please ensure that you have installed 4
AAA batteries.

SETTING CLOCK ALARM

The unit provides three independent clock alarm, AL1, AL2, AL3.
1. In standby mode hold II/Alarm button for 2s, 'DESPERTADOR1 OFF' will be displayed (OFF is
flashing), press ? / ? button to switch the alarm 'ON' or you can press MENU key to select
AL2 or AL3 to set.
button for 2s, the current ring number will be displayed & the
30