AIPTEK D20 Manual Del Usuario página 19

Addendum
Troubleshooting
If your DVD player does not seem to be functioning properly, check the items
below before you contact an authorized service center.
Symptom
Power does not
turn on or suddenly
turns off.
Remote control won't
work
No picture or sound
No projected picture
No sound
No picture and sound
Distorted video or
sound
Radio is unclear or
distorted
No image or image is
black and white
Downloaded From projector-manual.com Aiptek Manuals
All manuals and user guides at all-guides.com
• Make sure the AC cord is securely plugged into AC socket and
an AC outlet.
• Turn the power off and then back on.
• Check that the battery is inserted in the "+" and "-" direction
properly.
• The battery may be flat. Replace it with a new one.
• Check that the signal transmission is directed at the remote
control sensor on the DVD player.
• Remove the obstacle between the remote controller and remote
control sensor.
• Check that the A/V cables are securely connected.
• Check that the disc is a DVD (region number 1 or all), DVD-RW
or AUDIO CD.
• Do not use a disc that has scratches or dirt.
• Check that the label-side of the disc is facing up.
• The pick-up lens of the DVD player may be dirty. Contact the
service center for lens cleaning.
• Check that the TV channel is set to VIDEO or AV if viewing with
a TV.
• Check image brightness and contrast settings.
• Check that the projector is turned on.
• Check the volume setting. If set to zero, turn up volume level.
• Check that the headphones are plugged into the PHONES
socket.
• Speakers cannot be used with the headphones.
• Check that the battery is properly installed and AC cord is
properly connected.
• Use a disc without scratches or dents.
• Check the direction, position and connection of the antenna.
• Adjust color settings.
• Check color settings.
16
Check Point