Tabla de contenido
Clearing Blockages in the Suction Hose
CAUTION
Be sure to turn the ON/OFF switch to the "O" position and disconnect the power
cord from the wall outlet before clearing the blockages in the suction hose and
cleaning the agitator assembly.
Hose cuff
Manchon du tuyau
Conección de
la manguera
Suction inlet
Entrée d'aspiration
Entrada de
succión
2 2
1 1
- 36 -
Set the vacuum cleaner to the
upright position.
Press in the side clips on the hose
cuff to remove it from the suction
inlet. Remove the blockage.
Reattach the hose cuff to the
suction inlet, then operate the
vacuum cleaner to check that the
blockage has been properly
cleared. If the hose is still blocked,
the suction force will be weak.
Tabla de contenido
