Bass Control - Rampage ACD-22 Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
2
30
29
VOL
CONTROL
11
VOL
28
3, 4, 5, 6, 7
1
POWER ON/OFF BUTTON (PWR)
Press this button to turn the unit on and off.
The unit will also turn on automatically when
a disc is loaded, or when any other button is
pressed.
2
VOLUME / LEVEL CONTROLS
To increase the volume level, press the
button. The volume will increase and the
level will be shown on the display panel
from a minimum of VOL 00 to a maximum
of VOL 100. To increase the volume
quickly, keep the button pressed. To de-
crease the volume level, press the
ton. Keep the button pressed to decrease
the volume quickly. The display will automati-
cally return to the normal indication 5 sec-
onds after the last volume adjustment or
when another function is activated. These
controls are also used in conjunction with
the Select (SEL) button
4
5
6
bass, treble, balance and fader levels as de-
scribed in
,
,
3
6 6 6 6 6
SELECT BUTTON (SEL)
This button is used to select the audio
function (volume, bass, treble, balance or
20,21
14
12
EQ
AS
PS
LOUD
1
2
3
SEL
PAU
SCN
RPT
BAND
22
23
24
8,10
fade) to be adjusted using the Level Control
Pressing the Select button once will set the unit
for volume adjustment (VOL will appear on the
display panel). Pressing the button additional
times will select bass adjustment (BAS on
display panel), treble adjustment (TRB), balance
(BAL), fader (FAD), and volume (VOL) again. The
display will return to the normal indication 5
seconds after the last adjustment or when an-
other function is activated.
4

BASS CONTROL

To adjust the bass level, first select the Bass
but-
mode by pressing the Select button
BAS indication appears on the display panel.
Within 5 seconds of choosing the Bass mode,
2
press the
to adjust the bass response as desired. The
bass level will be shown on the display panel
3
from a minimum of B--10 to a maximum of B 10
to adjust the
(B 00 represents flat response). The display
7
will automatically return to the normal indication 5
, and
.
seconds after the last adjustment or when
another function is activated. Adjusting the bass
level will automatically return the equalizer set-
ting to the FLAT mode from its previous setting.
17
9
18
CD-R/RW PLAYBACK
LEVEL METER
5
6
4
MODE
PWR
SHF
25
19
13
or
buttons of the Level Control
26
16
15
27
1
2
.
3
until the
Tabla de contenido
loading

Tabla de contenido