Cooau CU-SPC05 Manual Del Usuario página 8

In low light, higher ISO values result in brighter images, but with greater
image noise. Lower values result in lower image noise, but darker images.
When you change this setting, the LCD display immediately shows you
the effect on your image.
6. Effect: Normal/Sepia/B&W/Negative
Default setting is normal.
7. Contrast: -100 - +100
Default setting is 0.
8. Saturation: -100 - +100
Default setting is 0.
9. Sharpness: -100 - +100
Default setting is 0.
Sharpness controls the quality of details captured in your video footage
or photos. When you change this setting, the touch display immediately
shows you the effect on your image.
SYSTEM SETTING
1. Language: English/Spanish/German/Italian/French/简体中文/
Sets the language that appears on the camera.
2. Car Mode: On/Off
Default setting is off.
If you turn on car mode and connect camera with car cigarette lighter,
the camera will turn on automatically if you start your car and will turn
off if you stop your car.
11
日本語
3. Power Off: Off/1 Min./3 Min./5 Min.
Default setting is 3 minutes.
Powers off your camera after a period of inactivity to save battery life.
4. Date&Time: MM/DD/YY, HH/MM/SS
The date and time are automatically updated when you connect your
camera to the Live DV app. However, you can manually change these
settings, if needed.
Note: If the battery is removed from the camera for an extended period
of time, the date and time will be reset automatically.
5. Date Format: None, YYYY MM DD, MM DD YYYY, DD MM YYYY
Default setting is MM DD YYYY.
If you turn on Date Stamp, this camera adds date stamp to the videos
or photos you take.
If you select None, this camera will not add date stamp to the videos or
photos you take.
6. Frequency: 50 Hz/60 Hz
Default setting is 50 Hz.
7. Upside Down: On/Off
Default setting is off.
This setting determines the orientation of your video or photos to help
you prevent upside down footage.
8. Screen Saver: Off/1 Min./3 Min./5 Min.
Default setting is 1 minute.
Turns off the LCD display after a period of inactivity to save battery life.
To turn on the LCD display again, press any button on the camera.
12