Cooau CU-SPC05 Manual Del Usuario página 12

VIDEO
To record Video, verify the camera is in Video mode.
To start recording:
Press the Grey Video Button. The camera will emit one beep and the
camera light will flash while recording.
To stop recording:
Press the Grey Video Button again. The camera will emit one beep and
the camera light will stop flashing while recording.
PHOTO
To capture a photo, verify the camera is in Photo mode.
To take a photo:
Press the Red Photo Button. The camera will emit a camera shutter sound.
CR2032 BATTERY REPLACEMENT FOR CU-SPC05 REMOTE
1. Use a 1.8mm Phillips tip screwdriver to remove the 4 screws on the
back cover of the remote, allowing you to open it.
19
2. Remove another 4 screws on PCB board.
3. Lift the PCB board and slide out the battery, as shown in the picture.
Note: Do NOT rotate the PCB board to avoid reversing the camera and
video button functions.
4. Install the new battery, keeping the "+" pole facing up.
20