BE 4.75HP Manual De Operación página 8

5
HP
START-UP PROCEDURE (5HP, 6.5HP, &13HP UNITS)
Each step listed below is numbered above to give you an exact location on the
unit.
1
Check engine oil (SAE
10-30W). Oil Level
should read between
the hash marks on
dipstick.
13
2b
HP
Check pump oil (30W
non-detergent). Oil lev-
el should read on the
middle or just below on
the sight glass.
6.5 13
3b
HP HP
Fill gas tank on en-
gine with unleaded
gasoline only.
5
5a
HP
Attach high pressure
hose to front of Spray
Gun.
6
Ensure the inlet
filter is clean. Attach
Garden hose to
inlet garden hose
connector on pump,
and turn on water.
6
FOR SERVICE: 1-866-850-6662 & WWW.BEPRESSURE.COM
All manuals and user guides at all-guides.com
6.5 13
HP HP
Pump Oil does not need to be re-
placed. There is 4.5 ounces of oil in
the pump which will last the life of
the pump.*However, if the pump
has a site glass, the pump oil may
need replacing. Refer to Step 3 in
the troubleshooting guide.
START-UP
5 6.5
2a
HP HP
5
3a
HP
Fill gas tank on
engine with unleaded
gasoline only.
4
Attach high pressure
hose to outlet Quick-
Connect fitting on
pump.
6.5 13
5b
HP HP
Attach high pressure
hose to base of Spray
Gun.
7
Attach nozzle to tip of
Lance.