STAMOS Soldering S-LS-6 Manual De Instrucciones página 14

REPLACEMENT OF HOT AIR REWORK HEATING ELEMENT
REPLACEMENT OF THE SOLDERING IRON TIP AND SOLDERING IRON HEATING CORE
ELEMENT
2
1
6
14
1. HOT AIR gun covers
2. element of the handle
3. heater
4. heater cover
5. outlet pipe
6. nozzle
1
2
3
1. Before heater replacement make sure that the HOT AIR gun is completely cold.
2. Remove the screws in the gun covers.
4
3. Unscrew the element of the handle (2) and take off the gun covers.
4. Gently remove the fan and remove the wire board screws.
5. Disconnect the heater from the wire board (pay attention to the wires connec-
5
tion order).
6. Remove the heater from the housing, pay attention to the steel grounding wire.
7. New heater should be wrapped with new mica paper and then it should be placed
6
inside the housing.
5
4
3
7
9
EN
1. nut for mounting the soldering iron tip housing
2. soldering iron tip housing
3. soldering iron tip
8
4. plastic nut for mounting the heater and the board
wires
5. spring
6. heater
7. wires board
8. handle