Etac Molift Smart 150 Manual De Usuario página 9

General safety precautions
Use only accessories and slings that are adjusted to
fit the user, type of disability, size, weight and type
of transfer.
Working pause ratio/Duty Cycle.
Molift Smart 150 should not be run constantly for
more than 2 minutes (with maximum load), and
rest for minimum 18 minutes.
Duty cycle 10% intermittence.
Before use / Daily check / Monthly
Inspection to be performed daily or before use:
Make sure lifter has no visible damage, defects
or deformations
Make sure battery indicator is not illuminated
and service indicator is green
Make sure wheels are rolling freely and lifter is
easy to manouvre
Hand control
The hand control has 2 buttons, one for lifting
and another for lowering of lifting arm. The
hand control has an indicator that will illuminate
when battery level is low and the battery requires
charging.
Hand Control 2 buttons
Art. no. 0440002
Lifting Arm - Up / Down
How to use Molift Smart 150
Safe working load (SWL)
The lifter is marked with Safe Working Load (SWL)
Inspection to be performed monthly:
If there are any faults or defects, the lift needs to
be taken out of operation and marked "out of
order"
Leg spread mechanism is mechanical, and oper-
ated by two pedals. One pedal for legs inwards
and one pedal for legs outwards. Step on selected
pedal to open or close legs.
Legs - In / Out
NB! Open legs provides increased stability and
better access to chair or toilet.
9
The lowest SWL shall always be used
if safe working load (SWL) differs
between lifter, suspension and body
support unit
Molift lifters shall only be used to lift
persons. Never use the lifter to lift or
move objects of any kind.
Test all the lifters functions and make sure
lifter does not make any abnormal sounds
Test emergency stop button and emergency
lowering
Molift Smart 150 / www.etac.com