Hardware Installation; Computer Setup - Ovislink EVO-DSL Serie Guía Rápida De Instalación

All manuals and user guides at all-guides.com
Note : With Evo-DSL41 and Evo-DSL41W, the Reset button is placed under the product, near to a rubber
foot.

HARDWARE INSTALLATION:

1) Use a telephone cord to connect the LINE port of the splitter with the RJ-11 port
(the phone jack) on the wall.
2) Use another telephone cord to connect the ADSL port of the splitter with the LINE
port of the ADSL Modem.
3) Use another telephone cord to connect the telephone set with the PHONE port of the
splitter.
4) Connect Ethernet port of the router with 10/100BASE-T port of the computer using the
network cable that comes with the modem. If you have a Evo-DSL11 and you want to
use the USB port, please, insert the CD-Rom first, and install the driver (setup.exe).
After that, you can plug the USB cable.
5) Plug in the power cord, and turn on the power.

COMPUTER SETUP:

1) Configure the IP adress of the computer on automatic (DHCP client), which will allow
the modem/router to set a proper IP adress to the computer so that the whole
configuration and the internet connexion can be done.
2) If you use Windows 2000/XP , open the Configuration Panel and then the Network
Connections.
3) Right click on the Local Network Connection and choose Properties.
4) Click twice on Internet Protocol TCP/IP .
5) Select the automatic IP adress.
6) Select automatic DNS server adresses.
7) Click on OK.
8) Click on Close.
Once the windows are closed, check the configuration of your internet browser.
3