Electrical Information - TACKLIFE MTS01A Manual Del Usuario

All manuals and user guides at all-guides.com
14．NEVER CUT METALS.
Never cut metals or materials that may make hazardous dust.
15．ALWAYS USE A PUSH STICK.
Always use a push stick, especially when ripping narrow work¬pieces. One is supplied with
this saw and a pattern for making a push stick is included in this manual.

ELECTRICAL INFORMATION

WARNING!
All electrical connections must be done by a qualified electrician. failure to comply may result in
serious injury. All adjustments or repairs must be done with the machine disconnected from the power
source. Failure to comply may result in serious injury.
POWER SUPPLY
This Table saw must be grounded. If it should malfunction or breakdown, grounding provides a path of
least resistance for electric current, to reduce the risk of electric shock. This Table saw is equipped
with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
Your Table saw must be properly grounded. Not all outlets are properly grounded. If you are not sure
if your outlet is properly grounded, have it checked by a qualified electrician.
WARNING: TO MAINTAIN PROPER GROUNDING OF YOUR TABLE SAW, DO NOT REMOVE OR
ALTER THE GROUNDING PRONG IN ANY MANNER.
WARNING: IF NOT PROPERLY GROUNDED, THIS TABLE SAW CAN CAUSE ELECTRICAL
SHOCK, PARTICULARLY WHEN USED IN DAMP LOCATIONS. TO AVOID SHOCK OR FIRE, IF
THE POWER CORD IS WORN OR DAMAGED IN ANY WAY, HAVE IT REPLACED IMMEDIATELY.
OPERATION
America and Canada: As received from the factory , your Table saw is ready to run for 110V-120V
operation.
Europe: As received from the factory , your Table saw is ready to run for 220V-230V operation.
ON/OFF SWITCH
The On/Off switch (A) Fig.3 turns the Table saw On or Off. To turn the Table saw ON, push the switch
upwards to the On position.To turn the Table saw OFF, push the switch downwards to the Off
position. A padlock can be used to lock the switch to prevent unauthorised use, but only when the
switch is in the Off position.
- 4 -
EN