Zig-Zag Sewing; Ponto Em Ziguezague - Jata Costura Seleccion 740 Manual De Instrucciones

Tabla de contenido
MANUAL DE INSTRUCCIONES • INSTRUCTIONS MANUAL • MANUAL DE INSTRUÇÕES

zIG-zAG SEWING

Turn the pattern selector dial to " B".
Function of stitch width dial
The maximum ziz-zag stitch width for
zig-zag stitching is " 5"; however, the width increases
as you move zig-zag dial from "0" - "5". For twin
needle sewing, never set the width wider than "2.5".
(1)
Function of stitch length dial while zigzaging
The density of zig-zag stitches increases as the
setting of stitch length dial approaches "0". Neat zig-
zag stitches are usually achieved at " 2.5" or below. (2)
Satin stitch
When the stitch length is set between "0" - "1", the
stitches are very close together producing the "satin
stitch" which is used for making buttonholes and
decorative stitches.
Sewing thin fabrics:
When sewing very thin fabrics, it is suggested that
you use interfacing on the backside of the fabric.
38
All manuals and user guides at all-guides.com

PONTO EM zIGUEzAGUE

Rode o disco seletor do desenho do ponto até à
posição " B".
Disco seletor de largura do ponto
A largura máxima do ponto em ziguezague
corresponde à posição "5"; a largura do ponto
em ziguezague aumenta ao rodar o disco seletor
para a posição "0" a "5". Ao coser com agulha
dupla, não coloque o disco seletor de largura de
ponto numa posição superior a " 2.5". (1)
Função do disco seletor de comprimento
do ponto para pontos em ziguezague
A densidade dos pontos em ziguezague aumenta
à medida que o disco seletor de comprimento do
ponto se aproxima da posição "0". Para obter
pontos em ziguezague muito precisos ajuste o
disco seletor na posição " 2.5" ou inferior. (2)
Ponto de cetim
Quando se coloca o disco seletor entre "0" e "1",
os pontos ficam muito juntos resultando no que
se conhece como " ponto de cetim", normalmente
utilizado para fazer casas ou pontos decorativos.
Coser tecidos leves:
Para coser tecidos muito leves recomendamos
que trabalhe no avesso do tecido.
Tabla de contenido
loading

Este manual también es adecuado para:

Mc740

Tabla de contenido