Saber R33CC0312 Instrucciones De Montaje página 10

Procedure - Replacing your Side Burner - New Side Burner Installation
Install the two bottom Bolts.
•
5
Once all Bolts have been installed by hand, tighten
•
all Bolts securely with your 7/16" Socket Tool.
TOP BOLT - TIGHTEN
SECURELY
BOTTOM BOLT - REPLACE
BOLTS ON BOTH SIDES
AND THEN TIGHTEN
SECURELY.
Reconnect the Ignitor Electrode Wire to the Side
•
6
Burner Electrode by hand. You may need to hold the
Electrode with one hand while pushing the
connector with the other hand.
Reinstall the Side Burner Grate.
•
Install the Quick Disconnect connection to the Side
•
7
Burner by pulling back on the disconnect ring on
the brass fitting by hand.
Once the disconnect ring is pulled back the brass
•
fitting will push onto the Side Burner Manifold and
release the brass ring to lock into place.
Pull gently to ensure the connection is complete
•
1
2
© Saber Grills, LLC
All manuals and user guides at all-guides.com
10
80028080 ● 09/13/17 ● Revision 03
Printed in U.S.A.
sabergrills.com