Setting The Clock; Listening To The Radio - Teac R-2 Manual Del Usuario

Setting the Clock

1 4
2 3
1 Press and hold the CLOCK ADJUST
button for more than 3 seconds.
"SET" and "CLK" appear alternately.
< If no button is pressed for 10 seconds, the
clock setting mode will be cancelled.
2 If you want to change the hour mode,
press the ALARM CHECK button to
select 24 or 12 hour mode.
The default setting is 12-hour.
10
All manuals and user guides at all-guides.com
3 Turn the MULTI JOG knob to adjust
the clock.
4
Press the CLOCK ADJUST button.
The clock starts from 00 second.
< If the unit is disconnected from the power
supply and the batteries have been
completely discharged for about an hour,
clock and timer settings will be lost.
To show the SECONDS display
Press the CLOCK ADJUST button.
The display shows current seconds for
20 seconds, and returns to the normal
display.

Listening to the Radio

4
1 2 3
1 Press the STANDBY/ON switch to turn
the unit on.
< The unit turns on with the source that
was last selected.
2
Select FM or AM using the FUNCTION
button.
3 Turn the TUNING knob to tune in a
station.
When the TUNING knob is turned, the
frequency changes by fixed steps.
Turn the TUNING knob repeatedly until
the station you want to listen to is found.
4 Turn the VOLUME knob to adjust the
volume.
The level can be adjusted from MIN (00)
to MAX (30).
If the AM reception is poor
Turn the unit around to find the best
position for AM station reception. The
AM antenna is within the cabinet so
rotating the cabinet may improve the
reception.
If the FM reception is poor
For the best reception, rotate either the
extendable antenna or the plug-in wire
antenna until you receive stations clearly.
11