Kathrein UFO 372/TP Manual Del Usuario página 22

The fi rst line shows the type of the programme that was selected, together with the number of the programme and the number
of programmes on the transponder.
T=TV programme
Programme no. (e.g. 001)
of the selected programme
The second line shows the programme name, together with its fi lter status (+ or -).
The default setting for the status of the programmes that are displayed is " - ", i.e. no programmes are transmitted when the
programme fi lter is switched on, but the programming list is not being processed.
The "Generate" button in the third line starts the compilation of the programme list, that then is effective.
The selection of the programmes carried over is performed using the " + " and " – " buttons, where the status " + " means the
programme will be carried over and the status " – " means it will be removed.
The "Status" parameter is selected using the " < " and " > " buttons.
The settings become effective when the fi lter table has been compiled. This is done using the " < " and " > " buttons; select the
"Generate" parameter and use the " + " or " – " buttons to initiate the compilation of the programme table.
Note: The programme fi lter can be processed even if it is not activated ("off"). This means that the operation can be
checked or temporarily deactivated without waiting times or reprogramming.
If the programming list was not processed but the programme fi lter was switched on, the previously saved list
will be active, or in the absence of any list no programmes will be transmitted.
** UFO 372TP-I
T / 001 / 009
Das Erste
Generate
"Filter" sub-menu
The "Programme fi lter" sub-menu is exited using the "Sub-menu" button.
Note: If the maximum possible number of programmes carried over is exceeded, an error message appears.
1.14 Transport stream processor: Operator ID
I 1236 MHz
27,500 MS/s
Outp. S21
6,900 MS/s
Main menu
The setting of the Operator ID "OID" is performed in the TP (Transport stream processor) sub-menu.
The "TP" transport stream processor is selected with the " < " or " > " buttons and the sub-menu is called up with the "Sub-menu"
button.
The Operator ID function is selected with the " < " or " > " buttons and is activated/deactivated with the " + " and " - " buttons.
The settings available are OID "on" / "off".
The Operator ID can be entered; to do this use the " < " and " > " buttons to select the numeric value and the " + " and " - " to
change it correspondingly. The values available are "00h" to "FFh".
This sub-menu can be exited only when the cursor is on the "OID" parameter.
To do this, use the " < " and " > " buttons to select "OID" and press the "Sub-menu" button to return to the main menu.
All manuals and user guides at all-guides.com
Sample text
R=Radio programme
Quantity (e.g. B. 009)
of the programmes in the transponder
**
/ -
□ □ □ □
TP
3/4 QPSK
Filter
306.00 MHz
OID
64 QAM
Programme fi lter
being generated
...
On generating the programme fi lter
** UFO 372TP-I
off
off
"Transport stream processor" sub-menu
D=Data service
**
00h