Tabla de contenido
Idiomas disponibles
Idiomas disponibles
126499
Maintain your power tool
•
Ensure all ventilation holes are kept clear at all times. Overheating and
fire may otherwise result.
Always Disconnect
•
Before changing fittings or accessories, always ensure that your tool is
disconnected from the power source.
Switch off before connecting
•
Ensure that the power tool is switched off before connecting to the power
source. If the power tool stops unexpectedly, turn the power switch to off.
Do not abuse the power cord
•
Be sure your cable or extension cable is in good condition. Always have
a damaged cable or extension cable replaced at an authorised service
centre before using it. Never yank or pull the cable to disconnect it from
the power socket. Never carry your tool by its cable. Keep the cable away
from damp, heat, oil, solvents, and sharp edges.
Don't leave the tool running unattended
•
Always wait until your tool has completely stopped functioning, and has
been unplugged, before leaving it.
Spray Gun Safety
•
Never point a spray gun towards yourself, other people, or animals.
•
Always read paint or stain manufacturer's guidance thoroughly. If paint
or stain comes into contact with skin, consult manufacturer's guidance
immediately.
•
This spray gun works at very high pressure, and is capable of penetrating
skin. If paint or stain is injected under a persons skin, seek medical help
immediately.
•
Never use this spray gun with flammable, corrosive, toxic, or abrasive
liquids.
•
Always spray in a well ventilated area, away from any sources of ignition.
Be aware that even very light wind will cause the paint or stain mist to
drift.
•
Keep other people, especially children, away from the work area.
126499_instructions.indd 5
All manuals and user guides at all-guides.com
www.silverlinetools.com
120W Spray Gun
4/3/10 09:39:13
5
Tabla de contenido
