Electrical Installation - THERMEx MANCHESTER SMART Manual De Instrucciones

M 520232061204092018
7
Tighten the screws in order to secure the
hood to the wall.
INSTALLING UNDER A cUPBOARD
Installing the hood at the bottom of a cupboard is carried out as follows:
1
Measure out and mark the position of the
four mounting holes on the bottom of the
cupboard.
4
cut a hole in the bottom of the cupboard for
the exhaust.
NOTE: This only applies when venting into
open air.

ELECTRICAL INSTALLATION

connect the hood to the electrical mains socket using the installed plug. The wire on the hood is 1.4 metres long.
NOTE: The hood is double-insulated and does therefore not need to be earthed.
All manuals and user guides at all-guides.com
8
Replace the filters back in the hood.
2
Pre-drill the holes in the bottom of the cup-
board.
5
x4
Mount the hood using four screws that
match the material into which they are being
screwed.
THERMEX MANcHESTER SMART
9
Install the exhaust outlet on the hood.
NOTE: This only applies when venting into
open air.
3
Measure out and mark the position of the
hood's exhaust on the bottom of the cup-
board.
NOTE: This only applies when venting into
open air.
6
Install the exhaust outlet on the hood.
NOTE: This only applies when venting into
open air.
39