SysTech SY-VB10D Manual Del Usuario página 6

Camera Unit System
1. Connect one end of transformer
to the interface at one side of
the camera unit system
(as shown in Figure 4) and
connect the other end of the
transformer to the power supply.
2. Press ON/OFF button to start
the camera unit system.
Placement Type
Stand Type:
Wall Mount Type:
Magic Belt Type:
Stand Type
All manuals and user guides at all-guides.com
The angles in the four directions (i.e., front, rear, right and left)
can be adjusted appropriately.
screw a screw into the wall and x it with a distance about
8-9mm away from the wall, then hang the camera unit system.
put the magic belt through the camera unit system base and tie
it to the cylinder (Noted: it can not be tied to the crib).
Magic Belt Type
Figure 4
5
Wall Mount Type