SysTech SY-VB10D Manual Del Usuario página 12

2. Press and hold [
will appear as follows:
3. Press [ ] and [
seconds, and release after the indicator lights up.
4. Press arrow keys to select Ch2 and Pair, press [
appear:
Press [ ] again, Ch2 Paired will appear in the system, it means that the CH2 has
been successfully paired. It is as shown as follows:
Press EXIT and press [
5. Repeat steps 1-4 to pair Ch3 and Ch4.
All manuals and user guides at all-guides.com
] , meanwhile, push ON/OFF button, the pairing list screen
Press Up/Down button to select channel
Press Left/Right button to set
Press Ok button to entry
CH1 Pair Del
CH2 Pair Del
CH2 Pair Del
CH2 Pair Del
Exit
] at the right side of the camera unit at the same time for 2
Pairing succeed Ch2 is selected
Press OK button to back Menu
Press Up/Down button to select channel
Press Left/Right button to set
Press Ok button to entry
CH1 Pair Del
CH2 Pair Del
CH2 Pair Del
CH2 Pair Del
Exit
] again to return to the screen of monito unit.
Status
Paired
Null
Null
Null
] and the following screen will
Status
Paired
Paired
Null
Null
11