Feiss HUGO 9 Guia De Inicio Rapido

Installation Instructions for
Hugo 9 Light Chandelier
Chandelier
G ENERAL RODUCT NFORMATION P
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for dry indoor locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1A
1
CHAIN LINK
2
EXTENDABLE ARMS
SCREW
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
Determine desired width of extendable arms, then loosen and tighten screws as needed.
2
3 Screw the stem, spacer, ball and fixture loop to the threaded pipe as shown, then screw the threaded pipe to the fixture.
Install candle tube by slipping through socket.
4
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
5
Place and secure shade over lamp.
6
7 Open chain link and secure it to the fixture loop by closing the link.
I :
7
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
FIXTURE
7
LOOP
BALL
SPACER
3
3
1
F2903-6+3
6
SHADE
5
LAMP
STEM
CANDLE TUBE
4
THREADED PIPE
F2903-6+3
1.1