Feiss OL11900 Instrucciones De Instalación

Installation Instructions for
Estes Outdoor Lantern
G
ENERAL RODUCT NFORMATION
P
These fixtures are intended to be installed utilizing
junction boxes.
This product is safety listed for wet locations.
This instruction shows a typical installation.
1A
JUNCTION BOX WHITE WIRE
NEUTRAL WIRE
7
1
1 8
HOT WIRE
BLACK WIRE
Secure the mounting plate to the junction box.
1
Install the candle follower by placing it on top of the candle tube. Repeat for remaining candle followers.
2
Screw the lamp(s) into the socket(s). Refer to the label on the lamp socket for Max Wattage information.
3
Install the glass panels by sliding them into the fixture and secure them using the brackets and cap nuts.
4
Place the cover onto the fixture and secure it using the cover screws.
5
Connect the fixture to a suitable ground in accordance with local electrical codes.
6
Connect the white fixture wire to the neutral power line wire with a wire nut.
7
Connect the black fixture wire to the hot power line wire with a wire nut.
8
Neatly place the wires and wire nut connections into the junction box, mount the fixture base onto the mounting plate,
9
and secure it with the fixtures screws.
For wet locations, caulk around the base of the fixture with waterproof construction sealant.
10
Wall
I
:
NEC compliant
COVER
FIXTURE
SCREW
MOUNTING
PLATE
9
9
OL11900, OL11901, OL11902, OL11903
CAUTION RISK OF FIRE
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
5
4 4
3
5
2
CANDLE
TUBE
1
OL11900_OL11901_OL11902_OL11903
-
10
CAP NUT
BRACKET
LAMP
CANDLE FOLLOWER
GLASS PANEL
1.0