During Use; After Use - Skil 2900 Manual Original

d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
5) BAttERY tOOL uSE AnD CARE
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
b) use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
c) when battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
d) under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
SAFEtY InStRuCtIOnS FOR CORDLESS SCISSORS
GEnERAL
• Do not use tool/charger when damaged; take it to one of
the officially registered SKIL Service Stations for a safety
check
• Do not leave the tool unattended
• this tool is not a toy; keep it out of reach of children
• This tool should not be used by people under the age of
16 years
• Do not clamp the tool in a vice
• Do not expose tool/charger/battery to rain
• Do not carry or suspend the charger by the cord
• Never pull the charger cord to disconnect the charger
from the power source
• Keep the charger cord away from heat, oil and sharp
edges
ACCESSORIES
• SKIL can assure flawless functioning of the tool only
when original accessories are used
All manuals and user guides at all-guides.com
BEFORE uSE
• Always check that the supply voltage is the same as the
• Check the functioning of the tool before each use and, in

DuRInG uSE

• Keep hands away from moving cutting blades
• keep hands away from cutting area; never reach
• Ensure that no material or surface under the cutting area
• Hold tool by insulated gripping surface when performing
• In case of electrical or mechanical malfunction,

AFtER uSE

• Remove battery from tool before making any adjustments
• Store tool/charger in locations where temperature will not
CHARGInG/BAttERIES
• Charge battery only with the charger that is supplied with
• Never charge battery outdoors 4
• Do not charge battery in damp or wet environments
• Do not use charger when cord or plug is damaged; cord
• Do not use battery when damaged; it should be replaced
• Do not disassemble charger or battery
• Batteries may explode when disposed of in fire, so do not
EXPLAnAtIOn OF SYmBOLS On CHARGER/BAttERY
3 Read the instruction manual before use
4 Only use the charger indoors
5 Double insulation (no earth wire required)
6 Fail-safe isolating transformer (the power source is
7 Automatic shut-off when charger gets too hot (thermic
8 Incorrect polarity of the charger connection could cause
9 Do not dispose of the charger together with household
0 Do not dispose of the battery together with household
! NiMH technology provides more energy in a less
uSE
• On/off @
6
voltage indicated on the nameplate of the charger
(chargers with a rating of 230V or 240V can also be
connected to a 220V supply)
case of a defect, have it repaired immediately by a
qualified person; never open the tool yourself
underneath the material for any reason while cutting
can be damaged by the cutting blades
an operation where the cutting blades may contact
hidden wiring; contact with a "live" wire will make exposed
metal parts of the tool "live" and shock the operator
immediately switch off the tool or unplug charger from
power source
or changing accessories
exceed 40°C or drop below 0°C
the tool
or plug should be replaced immediately at one of the
officially registered SKIL Service Stations
immediately
burn battery for any reason
electrically separated from the transformer output)
fuse blows and charger becomes useless)
a hazard (only charge the battery with the charger
supplied)
waste material
waste material
environment-polluting way
- switch on the tool by pushing switch A forward
- lock the switch for continuous use by pushing switch A
further forward until it snap-locks