Technical Parameters; Default Range - Mellerware Wizzy! Track Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
ESPAÑOL
FOLDING INSTRUCTIONS (Fig.5)
To fold the treadmill, raise the base
frame to position (A) until you hear
the sound that indicates that the
lower bar is locked.
To unfold the treadmill, separate
the two lower bars and press the
base frame down. The base will
drop automatically.
Instructions for use
USE
Turn on/off the treadmill by
pressing the on/off switch (F).
Press the mode button (T) to select
the time / distance / calories
desired. Press +/- buttons to set
the data.
Press start button (R) and after
3 seconds the treadmill will start
running.
If you press start button (R) without
any countdown mode settled, the
treadmill will start running at the
lowest speed.
During the running, you can adjust
the speed by:
- Pressing +/- button (D/O/U)
- Pressing (J) or (P) buttons. They
adjust the speed quickly to 4km/h
or 8km/h.
Press the stop button (S) or remove
the safety key (B) to stop.

TECHNICAL PARAMETERS

TIME -> 00:00 – 99:59 MIN:SEC
SPEED -> 0.8 – 14 KM/H
DISTANCE -> 0.00 – 99.9 KM
CALORIES -> 0.0 – 999 KCAL
PROGRAMS
Press program button (Q) to
choose the program between
P1-P15.
When the program is settled, the
time indicator will show default
data. To modify the time, press
+/- buttons.
Each program is divided in 20
sections (see Table 1).
Press the start button and the
machine will run at the first
section speed.
FAT TEST
Press programs button (Q) till
"FAT" appears on the screen.
When FAT state, press mode
button to select "Sex", "Age",
"Height" and "Weight".
To set each parameter, use
+/- buttons.
DEFAULT
0
SEX
AGE
25
HEIGHT
170cm
WEIGHT
70Kg
HEART RATE
Hold the pulsation sensor by two
hands. The pulse indicator will
show your heart rate after 5
EN
ES
RANGE
0 (Male)
1 (Female)
10-99
100-240cm
20-160Kg
Tabla de contenido
loading

Productos relacionados para Mellerware Wizzy! Track

Tabla de contenido