Hardware Installation - Stardom itank i302-1S-SB2 Manual Del Usuario

4. Hardware Installation

Please follow the instructions below to complete the hardware installation:
Step1 Open the package and take out the product making sure that all the enclosed
contents are not damaged or missing. Should you find damages or missing
contents, please contact your supplier immediately.
Step2 Place the enclosure on a stable surface, ensure that it is well ventilated without
blockage to the vent and kept away from locations near water or where the
product may become vulnerable resulting in damages.
Step3 Use the provided screws to mount the enclosure base stand to the bottom of the
enclosure unit to enable vertical positioning.
Step4 Use the provided key in the accessories kit and inserted into the key access
opening to eject the removable drive tray latch and extract the removable drive
tray.
Step5 Remove the drive stabilizer from the removable tray then mount the hard drive
onto the tray and secure it with the screws enclosed in the accessories kit. Once
completed, insert the drive tray back to the drive position and push the latch into
place.
Step6 Choose one of the provided cables of your preference to connect the preferred
interface connection on the enclosure unit to the computer.
Step7 Attach the AC power cable to the DC power adapter then connect one end to the
power socket on the enclosure unit and the other end to the power socket. Once
completed, you may power on the unit.
4
STARDOM iTANK Series User Manual