Battery Charging; Preliminary Procedures - Viper AS4325B Instrucciones De Uso

INSTRUCTION FOR USE

BATTERY CHARGING

Preliminary procedures

1. Open the cover (C, Figure12) and check that the recovery water tank (B) is empty, otherwise empty it with the drain hose (A).
2. Carefully move the recovery tank kit (B, Figure 12).
3. Connect the battery connector (D, Figure 12).
4. Carefully put it back the recovery tank kit (B, Figure 12).
5. Pushing the machine on a level floor.
6. Press the start switch (G, Figure 12).
7. For WET batteries only:
• Check the level of electrolyte inside the batteries (F); if necessary, top up through the caps.
• Leave all the battery caps open for next charging.
• If necessary, clean the upper surface of the batteries (F).
8. Charge the batteries according to the following procedure.
B
C
NOTE
Charge the batteries when the yellow (I, Figure 12) or red warning light (H) turns on, or when finishing clean-
ing.
CAUTION!
Keeping the batteries charged makes their life last longer.
CAUTION!
When the batteries are discharged, charge them as soon as possible, as that condition makes their life shorter.
Check for battery charge at least once a week.
A
D
E
F
20
H I J
G
Figure 12
Figure 12
ENGLISH