Operating Instructions; Battery Pack; On/Off Switch - Kobalt KWL 224-03 Manual De Instrucciones

OPERATING INSTRUCTIONS

1. Battery Pack

To Attach Battery Pack
a. Align the raised portion on the battery pack with
the grooves on the bottom of the tool, and then
slide the battery pack onto the tool as shown.
b. Make sure that the latch on the battery pack
snaps into place and the battery pack is
secured to the tool before beginning operation.
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on battery pack
aligns with the groove on the tool and the latches
snap into place properly. Improper assembly of
the battery pack can cause damage to internal
components.
To Detach Battery Pack
a. Press the battery-release button to release the
battery pack.
b. Pull forward on the battery pack to remove it
from the tool.

2. ON/OFF Switch

a. To turn the LED work light ON, depress the ON/
OFF switch (A).
b. To turn it OFF, press the switch again.
All manuals and user guides at all-guides.com
6
1a
1a
2
F