Before First Use - Brinkmann Home Security SL-8 Manual Del Propietário

All manuals and user guides at all-guides.com
INSTR-821-7100-0_SL7_Span.qxd
HOW YOUR HOME SECURITY SOLAR POWERED,
MOTION ACTIVATED LIGHTING SYSTEM WORKS
READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING
YOUR SOLAR LIGHT. SAVE THIS MANUAL FOR FUTURE REFERENCE.
During the day, the solar panel converts sunlight
into electricity and recharges the battery. At night,
the light turns on automatically when it detects
motion using the electricity stored during that day.
The number of activations per night are dependent
on your geographical location, weather conditions
and seasonal lighting availability.
Solar light does not receive as much direct
sunlight in winter months. Therefore, the number
of activations per night will be reduced
during winter.
1
6/25/07 2:56 PM Page 2
Contains lead-acid (Pb)
battery. Battery must be
recycled or disposed of
properly.
BEFORE FIRST USE – After installing the main housing and
solar panel, leave the switch in the "OFF" position and
charge in FULL, DIRECT SUNLIGHT for THREE FULL DAYS.
Then turn the switch to the "AUTO" position. The light will
turn on automatically at night when it detects motion.
The Home Security Solar Powered, Motion Activated Lighting
System is designed to turn on automatically at night when a
person enters the detection zone. The light will stay on as
long as the motion detector senses motion in the zone. The
light will turn of in approximately 90 seconds after the
person leaves the detection zone or stops moving.
Detection Zone