All manuals and user guides at all-guides.com
BEFORE CALLING FOR SERVICE
Please make these simple checks before calling service. These tips may save
you time and money since charges for receiver installation and adjustments of
customer controls are not covered under your warranty.
Symptoms
Items to Check and Actions to follow
"Ghost" or
This may be caused by obstruction to the antenna due to
double image
high rise buildings or hills. Using a highly directional antenna
may improve the picture.
No power
Check if the TV's AC power cord is plugged into the mains
socket.
Unplug the TV, wait for 60 seconds. Then reinsert plug into
the mains socket and turn on the TV again.
No picture
Check antenna connections at the rear of the TV to see if it
is properly connected to the TV.
Possible broadcast station trouble.
Try another channel.
Adjust the contrast and brightness settings.
Check the Closed Captions control. Some TEXT modes
could block the screen.
Good picture
Increase the VOLUME.
but no sound
Check if the TV is muted; press the MUTE button on the
remote control.
Good sound
Adjust the contrast, color and brightness settings.
but poor color
Poor picture
Poor picture quality may occur when an activated S-VHS
camera or camcorder is connected to your TV and the
other peripheral at the same time. Switch off one of the
peripherals.
Snowy picture
Check the antenna connection.
and noise
Horizontal
This may be caused by electrical interference (e.g. hair dryer,
dotted line
nearby neon lights, etc.)
Turn off the equipment.
Television not
Check whether the batteries are working. Replace if
responding to
necessary.
remote control
Clean the remote control sensor lens on the TV.
You can still use the buttons at the front of your TV.
Select the TV mode to ensure your remote control is set in
the TV mode.
28