Idiomas disponibles
Idiomas disponibles
CAUTIONS
General safety information for the use of electrical devices:
To avoid injury from fire or electric shock, please ensure compliance with safety instructions when using this device. Please
read the instruction carefully and make sure that you have understood it well. Keep the manual near the equipment to
be able to read it at any time. Always use current sources connected to the ground and providing the necessary voltage
(indicated on the label on the device). If you have any doubt, let an electrician check that your outlet is properly grounded.
Never use a damaged power cable. Do not open the unit in damp or wet environment, or if your hands or clothes are
damp. Protect the unit from solar radiation. Use the device in a protected location to avoid damaging the equipment or
endangering others. Make sure the device is able to cool and avoid placing it too close to other devices that produce
heat. Before cleaning, disconnect it. Use a soft damp cloth for cleaning. Avoid using detergent and make sure that no liquid
enters the unit. No internal element of this device needs to be maintained by the user. An opening of the device without
our approval leads to a loss of warranty.
BEFORE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please contact your
transport company and distributor within 3 days, and document the damages as detailed as possible. Do not turn the
package upside down! When transporting the package, please ensure that it is kept horizontal and stable. Please keep
all packaging materials (cardboard, plastic tapes and styrofoam), so the device can be sent back to the service centre in
accurate condition in case of any problems.
Disposing of packaging
The various items used for packaging (cardboard, plastic straps, polyurethane foam) should be kept, so that the device can
be sent back to the service centre in the best condition in case of a problem!
TECHNICAL DETAILS
Model
S-LK-1
Output power (W)
75
Voltage (V)
26 AC
SAFETY ISSUES REMARKS
1.
Tips may only be changed when the soldering iron is completely cold.
2.
It is forbidden to use the device near flammable or combustible material and objects or in environments containing
such dangers. The tips reach very high temperatures, it is forbidden to touch these elements. This can cause serious
burns.
3.
Soldering tip temperatures that are too high may cause functionality reduction of the soldering iron.
4.
Soldering iron tip must be cleaned regularly using sponge and plate on a layer of tin to prevent tips oxidation.
REPLACEMENT OF THE SOLDERING IRON TIP AND SOLDERING IRON HEATING CORE
ELEMENT – MODEL S-LK-1:
5
4
3
2
1
8
7
9
6
S-LK-2
S-LK-3
60
75
24 AC
26 AC
1.
nut for mounting the soldering iron tip housing
2.
soldering iron tip housing
3.
soldering iron tip
4.
plastic nut for mounting the heater and the board
wires
5.
spring
6.
heater
7.
wires board
8.
handle
9.
smoke absorber pipe
REPLACEMENT OF THE SOLDERING IRON TIP AND SOLDERING IRON HEATING CORE ELEMENT–
MODELS S-LK-2, S-LK-3:
5
4
3
2
1
8
7
9
6
BEFORE HEATER REPLACEMENT, MAKE SURE THAT THE SOLDERING IRON IS COMPLETELY
COLD!
1.
SOLDERING IRON TIP REPLACEMENT: remove the nut for mounting the soldering iron tip housing and take off the
housing. Replace the tip with the new one, place the housing and fix all with the plastic nut.
2.
HEATER REPLACEMENT: remove the nut for mounting the soldering iron tip housing and take off the housing along
with the tip. Remove the nut for fixing the heater (4) and gently remove the heater (6) along with the board with wires
(7). Replace the whole remembering the wires' connection order.
REGULAR CLEANING
Generalities
•
Never clean the device with a pressurized water-jet, industrial cleaners, and brushes or any other type of cleaning
utensil that could damage the surface of the appliance.
•
Before cleaning you must remove the electricity supply plug isolating the appliance from the main power circuit.
REGULAR CONTROL OF THE DEVICE
Control regularly that the device doesn´t present any damage. If there is any damage, please stop using the device. Please
contact your customer service to solve the problem.
What to do in case of problem?
Please contact your customer service and prepare following information:
•
Invoice number and serial number (the latest is to be found on the technical plate on the device).
•
If relevant, a picture of the damaged, broken or defective part.
•
It will be easier for your customer service clerk to determine the source of the problem if you give a detailed and
precise description of the matter. Avoid formulations like "the device doesn´t heat", which may mean that it doesn´t
heat enough or even not at all. Though, those two possibilities have a different causation!
•
The more detailed your information, the better the customer service will be able to answer your problem rapidly
and efficiently!
1.
nut for mounting the soldering iron tip
housing
2.
soldering iron tip housing
3.
soldering iron tip
4.
plastic nut for mounting the heater and
the board wires
5.
spring
6.
heater
7.
wires board
8.
handle
