System Information - D-JIX PVS 1007-20 BR Manual De Uso

Use to choose the audio output settings of the Blu-ray player.
• HDMI digital: use to set the sound decoding
• Down sampling: use to change the data rate.
• Dolby DRC: use to activate or deactivate Dolby DRC (uncompressed audio format).
• DRC: use to choose a dynamic sound mode.
2. Speaker settings
• Configuration: use to adjust the audio system.
• Test audio: use to test the audio system.
Press the "Setup" key to display the setup menu. Press "Setup" again to leave the menu.
Press ► three times to access system information.
In the sub-menu, press "◄ ►▼▲" to select the desired option then the "OK" key to confirm. The
system can be configured to your own preferences.
Displays the Blu-ray system information (the information in the above image is given as an example
only).
• Bitstream: sends the undecoded audio to the amplifier
• PCM: decodes the signal and sends it to the amplifier (not supplied)
• Re-encode: encodes and sends the audio

SYSTEM INFORMATION

23