Storage And Maintenance Of The Power System Battery And The Control Handle - Sublue WhiteShark Tini V10 Manual Del Usuario

To charge the control handle, an adapter with an output voltage of 5V and an output
current of 1A and above is required.
Please clean the water or dirt at the contact before charging.
6
Storage and Maintenance of the Power System Battery
and the Control Handle
1 When the product is not in use, the battery must be taken out and placed separately.
2 The battery or control handle shall be stored at 25±5 ° C, the humidity is 65 ± 20% RH, and the
battery power is maintained at 30% - 60%. It shall be separately placed in a cool and
ventilated place.
3 Don't leave the battery or control handle in direct sunlight or high temperatures (such as
near a microwave oven or an oven), because the battery may overheat and cause an
explosion.
Don't throw the battery or the control handle into fire, that may cause the battery to catch
4
fire or explode.
Don't charge the battery or the control handle near fire or heat.
5
Don't drop, squeeze or puncture the battery as this may cause battery leakage, fire or
6
explosion.
Don't disassemble or modify the battery. Private modifications may cause battery leakage,
7
fire or explosion.
Keep the battery or control handle out of the reach of children.
8
Don't charge the battery or control handle below 0 °C.
9
When the battery or control handle is used below 0 ° C, the battery power capacity will drop
10
sharply and the running time will be drastically reduced.
19