Lexmark 2200 Serie Inicio página 7

Understanding error codes on the display
When your control panel displays blinking numbers, see the table to correct the problem.
Error code What you should do
1 Load paper.
02
Paper Out 2 Press Power to feed paper and resume printing.
1 Press Power.
03
Paper Jam 2 Lift the scanner unit until the scanner support keeps it open.
3 Pull gently to remove the paper jam.
4 Close the scanner unit.
5 Press Power.
6 Print your document again.
1 Press Power.
04-05
Carrier Stall 2 Open the scanner unit.
3 Make sure nothing is blocking the paper or print cartridge path.
4 Close the scanner unit.
5 Press Power.
6 Print your document again.
If this does not correct your problem, contact Lexmark Customer
Support.
Contact Lexmark Customer Support.
06-14
Copying without a computer
1
Open the scanner lid of the All-In-One.
2
Place the item you want to copy face down on the glass, and then close the
scanner lid.
3
Press Copy Quantity repeatedly until the number of copies (1-9) you want to make
appears on the display.
4
Press Black Copy or Color Copy to copy using Normal quality.
Note: To copy using Best quality, press and hold Black Copy or Color Copy
for at least two seconds.
9