Servicing The Filter; Troubleshooting - Windsor RECOVER 18 Instrucciones De Uso

Maintenance

Servicing the Filter

NOTE: Be sure to frequently clean the fi lter. Allow fi lter to dry after being used for wet pick-up.
Filters used for wet pick-up including stripper must be thoroughly cleaned before being allowed to dry.
Worn fi lters can affect vacuum performance.
Replace the fi lter when it becomes worn out and normal cleaning of the fi lter will not restore vacuum performance.
The fi lter is accessed by lifting the head assembly off the tank.
Foam fi lter is easily removed by simply lifting the fi lter basket out of the tank.
Optional Cartridge fi lters – Remove the fi lter retainer by unscrewing the retaining nut and replace with new fi lter.

Troubleshooting

PROBLEM
Vacuum motor does not
run
Vacuum motor is running
but machine is not
vacuuming
Vacuum capacity
decreases
Dust comes out while
vacuuming
18
CAUSE
Bad fuse, cord or machine not
plugged in.
Float is blocking vacuum inlet.
Hose or attachment clogged.
Filter dirty.
Filter dirty or not installed
correctly.
86350500 WET DRY VACUUM
SOLUTION
Check cord and fuse. Check to see that
machine is plugged in properly.
Empty tank.
Clean hose and/or attachment of debris.
Clean or replace fi lter.
Check for proper fi lter installation or
replace fi lter.