Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

OPERATOR'S MANUAL
3000 SERiES ChESTS & CABiNETS
moDeL 31293 / 31295
service parts
caLL 1-800-366-7278 for service parts. Refer to Service
Parts Drawing for full listing of Service Parts.
LocatiNG moDeL # iNformatioN
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
capacities
• The maximum weight for each drawer should be no more than
50 lbs.
• Empty weight of Model # 31293 is 55 lbs.
• Empty weight of Model # 31295 is 96 lbs.
• Empty weight of Model # 31292 is 58 lbs.
• Empty weight of Model # 31294 is 114 lbs.
• The maximum product weight for both models, including con-
tents, should be no more than 700 lbs.
maiNteNaNce
• For casters, use high quality bearing grease, (yearly).
• Lubricate the slides with grease or equivalent,(twice yearly.)
• Lubricate lock with graphite, (yearly).
All manuals and user guides at all-guides.com
moDeL 31292 / 31294
Ball bearing slides
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit's luster finish. Apply the wax
as to a car. The wax will also help protect the unit against
scratches.
• Grease and oil can be removed with most standard
cleaning fluids. For safety, use a nonflammable cleaning fluid.
• if drawer liners are supplied, it is recommended they are used
to protect the finish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned
with soap and water.
DaNGer
is used to indicate a hazardous situation which,
if not avoided, will result in serious injury or death.
WarNiNG
indicates a hazardous situation which,
if not avoided, could result in serious injury or death.
cautioN is used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
cautioN: Read and follow all Safety Rules and Operating
instructions before first use of this product.
DaNGer
• Do Not stand on this product. You may fall or cause product
to tip.
• Do Not open more than one drawer. The product may be-
come unstable and tip.
• Do Not step in the drawers. You may fall or cause product to
tip.
• Do Not mount this product on a truck bed or any other mov-
ing object.
• Do Not move the product prior to closing and locking all the
drawers and chest lid. The drawers could come open and
make the product unstable and tip.
• Do Not place any objects on top of chest lid. Remove all
objects from chest lid before opening.
WarNiNG
• Wear safety GLasses when removing or repositioning
the slides.
• Do Not pull the unit, push it when moving
• use tHe BraKes when not moving this product. This will
prevent the product from rolling.
• Do Not alter this product in any manner. For example, do not
weld external lockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• Be carefuL when closing the cover. Remove hands before
the cover closes completely.
cautioN
• This product is not designed to be directly lifted with a fork lift,
or to be towed with any mechanical devices.
• The maximum weight for each drawer should never be
exceeded.
• Only transport this product empty. Properly secure when
transporting.
• Do Not exceed maximum product weight, including contents.
See Capacities for more information.
Friction slides
safety
F1874
Tabla de contenido
loading

Resumen de contenidos para Craftsman 3000 Serie

  • Página 1 All manuals and user guides at all-guides.com OPERATOR’S MANUAL Ball bearing slides Friction slides • Periodically the drawer fronts, drawer trim, and other surfaces 3000 SERiES ChESTS & CABiNETS should be cleaned with a mild detergent and water. • Auto wax will preserve the unit’s luster finish. Apply the wax as to a car.
  • Página 2: Caster Installation

    All manuals and user guides at all-guides.com assemBLy HarDWare Note: Not all assembly instructions will relate to your model. tooLs reQuireD: siDe HaNDLe attacHmeNt 3/8-in Wrench 1/2-in Wrench items Needed: Cross-tip Screwdriver #14 - 10 x 3/4 Cross-tip Screw (Qty: 4) Cross-tip Screwdriver process: •...
  • Página 3: Removing Drawers

    All manuals and user guides at all-guides.com Gas spriNGs iNstaLLatioN LaBeLs (if appLicaBLe) items Needed: process: Gas Springs (Qty: 2) • Apply a light film of glass cleaner to the surface where 5/16 - 18 Ball Studs (Qty: 4) the label is to be applied. 5/16 - 18 Clip-on Nut (Qty: 4) •...
  • Página 4 All manuals and user guides at all-guides.com operatioN removiNG aND iNstaLLiNG sLiDes tab style - Depress the release tabs on both sides, • To remove the slide from the unit, first remove the (this allows the slides to ride over the stops.) drawer.
  • Página 5: Piezas De Servicio

    All manuals and user guides at all-guides.com MANUAL DE USUARiO Cojinetes de bolas Correderas de friccion • Lubrique la cerradura con grafito (anualmente). SERiES 3000 CENTRO DE TRABAjO 135 • Limpie con detergente suave y agua los frontales y los bordes laterales CM CON 8 GAVETAS de los cajones y las demás superficies.
  • Página 6: Herramientas Necesarias

    All manuals and user guides at all-guides.com eNsamBLaJe ferreterÍa Nota: No todas las instrucciones de ensamblaje se refieren a tu modelo. HerramieNtas Necesarias: Llave inglesa de 3/8 inch iNstaLacioN De La maNiJa LateraL Llave inglesa de 1/2 inch elementos necesarios: Destornillador de Punta en Cruz Tornillos Phillips de No.
  • Página 7: Funcionamiento

    All manuals and user guides at all-guides.com iNstaLaciÓN De primaveras De Gas etiQuetas (si apLica) elementos necesarios: proceso: Amortiguador neumáticoes (Cant: 2) • Aplica una capa fina de limpiador para vidrios en la superficie Perno Esférico de 5/16 – 18 (Cant: 4) donde se colocará...
  • Página 8 All manuals and user guides at all-guides.com fuNcioNamieNto iNstaLaciÓN y DesiNstaLciÓN De correDeras • Para quitar la corredera de la unidad, primero quite la gaveta. • Después de quitar el cajón, comprueba si la unidad tiene estilo lengüeta – Oprima las lengüetas de liberación en ambos remaches en el frente de la corredera.

Este manual también es adecuado para:

31293312953129231294

Tabla de contenido