Assembly Instructions
All manuals and user guides at all-guides.com
(continued)
Step 3
Making sure the key-slot of the base is aligned
to the post leg
With the allen key (D) using the spring washer (E) and
the bolt (C) provided tighten the base to
the post.
Step 4
Flip open the quick release lever (B) on the post leg
to adjust the table-top to a comfortable height. Make
sure the height is fully locked by resetting the release
lever to its original position
Step 5
Adjust the table-top angle by turning it to the desired
angle. The table-top is held in position with its 'friction
hinge' mechanism
How to use
Height Adjustment
To change the height of the surface, open the quick release mechanism by
pulling the lever away from the column. Then push
or pull to the desired height.
Surface Angle Adjustment
The angle of the table top can be adjusted by 180 degrees using the
friction hinge.When rotating the surface, remove all items from the top so
they don't fall o .
Cautions
DO NOT LEAN
OR SIT ON THE
TABLE-TOP
600mm – 800mm
MAX LOAD OF 5KGS
ON THE PERSONAL
BAG HOOK
MAX LOAD OF 10KGS
ON THE TABLE-TOP
MAX LOAD OF 5KGS
ON THE TABLE
CORNER
