RCA RS2202 Manual De Instrucciones página 52

DOLBY DIGITAL SETUP:
Dual Mono:
Stereo: Set audio output to the stereo output.
L-mono: Set audio output to the mono-left channel.
R-mono: Set audio output to the mono-right channel.
Mix-mono: Set audio output to the Mix mono channel.
DYNAMIC:
Select this to reduce the overall volume and still keep defined audio sound.
Video setup page
VIDEO OUTPUT:
OFF: Set video output to the composite.
YUV: Set video output in analog component video format when connecting to Y/U/V terminals.
P-YUV: Set progressive YUV signals. Connection same as YUV.
Note: If the video setting differs from the physical connection, the TV set may be without
picture. In case of this, you can RESET the machine, then keep pressing key [V_MODE] until
the picture is OK again.
COLOR SETTING:
COLOR SETTING includes: SHARPNESS, BRIGHTNESS, CONTRAST, GAMMA, HUE,
SATURATION and LUMA DELAY.
Adjust each item in the Color Setting to get the suitable color output of the TV screen.
SHARPNESS: There are three optional output modes: HIGH\MEDIUM\LOW, can press
[enter] and and
BRIGHTNESS: Use the
CONTRAST: Use the
direction key to choose one.
or arrow button to move the scroll and adjust the brightness.
or arrow button to move the scroll and adjust the contrast.
- 52 -
SYSTEM SETUP