EN
Nylon string reload
Use only nylon string in the recommended diameter 1.8 mm and length of 8 meters.
The spool can be reloaded, as follows
Fit the string into the spool opening (1) according to figure [Fig. 09, page 05].
Coil the string in the direction indicated by the reel's arrow (2), [Fig. 10, page 05] as uniformly as
possible, obeying 8 metres as the maximum length recommended.
Using a nylon string of a larger diameter than specified will void the warranty.
Replacement parts
It is recommended that the replacement parts and nylon string spools are of the same model and brand
Tramontina. The string used in the spools is special for this function.
Nylon string adjustment
Manual
Keep pressed down the button (1) of the spool [Fig. 11, page 06] pull the nylon string up to the cutting
blade of the protector. Then release the spool button and the nylon strings so that the spool may
automatically be adjusted to its housing.
Automatic
With the motor in operation, press down slightly the spool button [Fig. 12, page 06] against the ground.
The piece of excess string will be cut by the limiting blade (2), [Fig. 11, page 06] during the operation
of the trimmer.
CARE TIPS AFTER USING
• After using, always disconnect the trimmer from the outlet.
• When not used, the trimmer must be stored out of the reach of children.
• Never replace the nylon string for other than Tramontina-made parts.
• Never use metal in replacement for the nylon string.
• Always keep the ventilation openings of the motor.
• After using, clean the trimmer using wet cloth or brush.
• Never pour water on the trimmer.
Instructions for waste disposal
Improper disposal of solid waste can cause serious damage to the environment, including soil and
water contamination. Therefore, solid waste should be separated and discarded properly. Recyclable
waste materials should be recycled.
14