Tools And Materials; Install The Supply Piping - Jacob Delafon E8002 Instrucciones

• The installlation requires an available depth of mounting of 95 millimeters. However,
we advise you a mininal depth of 100 millimeters to facilitate your installation.
• The finish of this shower equipment requires special care. To maintain its shine and
luster, clean regularly with a non-abrasive sponge and soap, rinse thoroughly and dry
with a soft cloth. Do not use harsh products containing methyl alcohol, acids, solvents
or abrasives that can damage the finish.

Tools and materials

Sealant
Tape

1. Install the supply piping

• Install the water supply pipes.
• If installing more than one bodyspray off the same supply line, construct a pressure
balancing loop. Locate a tee along the loop at each bodyspray installation location.
• Do not fix the pipework at this time.
Installation
cross-threaded
screwdriver
5/64'' & 3/16''
Hex Wrenches
Multiple bodyspray installation
Water
Supply
Covering
Pressure
Balancing Loop
Nipple
English
Level
Socket Wrench with 11
mm or 7/16'' Socket and
Extension
15