Tabla de contenido
Idiomas disponibles
Idiomas disponibles
C
To secure, click the locking clip (A) over the exposed end of the pin on the left
hand side, finally secure with cap (B) firmly pushing over clip (A). Repeat on
other side.
Warning: This fixing is not removable. This Highchair is not designed to be
disassembled once it has been constructed.
6
FITTING THE BASKET (if specified)
The basket attaches round the front basket bar by press studs and to the back
of the seat unit by the webbing hoops.
7
FITTING THE FOOT REST
Fit the footrest by sliding the grooves over the plastic fittings found on the
bottom of the seat until the footrest and seat unit are flush.
8
USING THE HARNESS
A
A five-point safety harness is provided to restrain your child and should
always be worn.
Sliding adjusters are fitted and should be carefully adjusted on each side so
the harness fits your child comfortably.
To fasten the harness push clips into buckle.
To unfasten push clips in and remove from buckle.
'D' rings are fitted at the end of each waist strap should you wish to attach a
separate harness complying with BS 6684.
B
Loop the webbing (for each shoulder strap) through the 2 slots in the seat
back and thread the webbing through the small gap in the metal D ring
to secure. If you cannot see the gap in the metal D ring turn the metal "D"
round through the webbing until it is visible.
C
For the waist strap slide each end buckles through the inner vertical slots and
turn each buckle on the back of the seat back to sit in the recess to secure.
DO NOT use the outer vertical slots.
D
Thread the crotch strap through the central slot and loop around the
horizontal support bar. Thread the webbing through the small gap in the
metal "D" ring.
If you cannot see the gap in the metal "D" ring turn the metal "D" round
through the webbing until it is visible. Ensure you fully thread the webbing
through the "D" ring so it cannot pull back through, check by pulling the
webbing taught.
IMPORTANT: SAFETY NOTE
The seat cover may be sponge cleaned only. If you feel the need to remove
the seat cover, for ease of cleaning, please ensure that you carefully follow the
instructions outlined in part 7 on how to correctly re-thread the safety harness.
All manuals and user guides at all-guides.com
Tabla de contenido
